Sikaflex


Sika Flex- Permanent Elastic Seal For Building Construction

Sikaflex multi-purpose one part, elastic, polyurethane adhesive and sealant type. This attaches to all common building materials, is permanently elastic and has excellent filling properties for the grab and distance. Sikaflex is a polyurethane adhesive sealant used to cure moisture and to create a permanent elastic seal for substrates including metals, wood, paint coatings, ceramics, and plastics.

Satiate is the country’s leading supplier of sikaflex specialty adhesives and sealants serving construction and industrial markets including transportation, marine, and automotive. Advanced technologies of Sikaflex are focused on sealing, bonding, damping, reinforcing and protecting. Satiate's versatility in cost-effectiveness, durability and preparation are valued by builders, sanitary engineers and plumbers alike.


Substrate Preparation of Sikaflex:

The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Sikaflex adheres without primers activators. However, for optimum adhesion and critical, high-performance applications, such as on multi-story buildings, highly stressed joints, extreme weather exposure or water immersion, the non-porous substrates and pre-treatment procedures shall be followed. Aluminium, anodised aluminium, stainless steel, galvanised steel, powder coated metals or glazed tiles have to be cleaned and pre-treated using Sika® Aktivator-205, wiped on with a clean towel.

The application method of sikaflex:


After the substrate preparation, insert a suitable backing rod to the required depth and apply any primer if necessary. Insert a foil pack into the sealant gun and extrude Sikaflex into the joint making sure that it comes into full contact with the sides of the joint and avoids any air entrapment.
Sikaflex sealant must be firmly tooled against the joint sides to ensure adequate adhesion. The use of masking tape is recommended where exact joint lines or tidy lines are needed. Replace the tape in preparation for skin. Use a compatible tooling agent to flatten the surfaces of the joints. Do not use solvent- based tooling materials. If Sikaflex is dry-tooled it shows a slightly structured, concrete-like surface. If it is wet tooled it shows a smooth surface.

Satiate leads the way for the construction industry to provide specialized services and solutions. Sikaflex is ideal for use in a wide range of building and maintenance situations of permanent elastic include metals, plastics, ceramic materials, paints and coatings, such as bonding and fixing of cabinets, mirrors and ceramics, bonding and sealing of flashes, roof tiles and acoustic tiles, filling of internal and external cracks.

Visit us: www.satiates.in/sika-flex.php
Contact us: (+91) 8530409518

Comments

Popular posts from this blog

Enhancing Construction Strength and Efficiency with Sika Block Joining Mortar

Best Chemical Waterproofing method - crystalline waterproofing

Waterproofing Membrane