SIKA MULTISEAL TAPE - SELF ADHESIVE BITUMINOUS SEALING TAPE

 

SIKA MULTISEAL TAPE - SELF ADHESIVE BITUMINOUS SEALING TAPE

 

As one of the leading suppliers of Bituminous Sealing Tapes in India, Satiate specializes in supplying self-adhesive tapes. They are delighted to offer a variety of very high-quality sensitive tapes that are a popular choice for bonding, bundling, damping, enhancing, protecting, and masking applications. As a leading provider of construction industry services and solutions, Satiate sets the standard.

 

As a leading supplier of innovative fire protection, construction chemicals, and roof drainage systems in the country, Satiate provides innovative solutions in these areas.

 

 

OVERVIEW

Rubberized bituminous sealing tape backed with aluminum foil; Sika Multiseal Tape is self-adhesive and self-mending.

 

ASSISTANTS

The sealing and repair of water draughts and ingress within: Roofs, including sheet metal linings, Cracked walls, Bituminous felts and other types of roofing sheets.

 

Sika Multiseal Tape has the following features:

●        Applying is simple

●        A weatherproofing method

●        Easily adheres to itself

●        Low-temperature application possible

●        Overpainting Is Possible

●        Bituminous substrates are compatible.

●        UV-resistant

 

 

 

 

The following applications are possible with Sika Multiseal Tape:

●        Keeping moisture out and draughts out

●        Steel Sheet Work on Roofs

●        Cracks in buildings

●        The product seals building cracks as well as exterior walls, terraces, bathrooms, etc.

●        Other Types Of Roofing Sheets And Bituminous Felts

●        Membranes for different types of roofing sheets

 

 

SUBSTRATE PREPARATION INSTRUCTIONS

 All contaminants on the surface of the substrate should be removed before using Sika Multiseal Tape. The loose particles, release agents, liquids, paints, rust, and other poorly adhering materials must be removed using appropriate tools by mechanical preparation or hand. Plastics, metals, and other materials must be thoroughly cleaned with a solvent. First, a bituminous primer (such as Inertol-1) can improve adhesion on porous surfaces (concrete, renders, etc.). At least 1 hour is needed for the primer to dry.

 

TOOLS & METHODS FOR APPLICATION

Remove the release film from the Sika Multiseal Tape, and press firmly on the substrate with a suitable pressure roller. There must be at least a 50 mm overlap between all mutual connections. A hot-air dryer can increase the adhesive's adhesion to the substrate during application.

 

CLEANSING TOOLS

The removal of residual material must be done mechanically once the cured material has been removed. If the residue material is not removed properly then there will be chances of leakage.

 

 

 

 

SITUATIONS

Seals cannot withstand water pressure. Contact your Sika Technical Service partner if you are waterproofing with water pressure. Sika Multiseal Bituminous tape may discolor coatings, plastics, and natural stones due to its bituminous content. 

 

SOCIAL SECURITY, ECOLOGY, AND HEALTH

A Safety Data Sheet (SDS) containing information about physical, ecological, toxicological, and other safety aspects of chemical products is the primary source of information and advice on the safe handling, storage, and disposal of chemical products.

 

NOTES ON LEGAL ISSUES

Sika provides information, particularly recommendations, regarding the application and use of its products based on its experience and current knowledge of the products under intermediate storage, handling, and application conditions as prescribed by Sika. This information does not form the basis of any warranties or representations regarding merchantability, fitness for a particular purpose, nor any liability arising from any legal relationship whatsoever, despite the differences in materials, substrates, and actual site conditions.

 

To determine whether the product meets the intended purpose and application, it should be tested by the user. Sika reserves this right. Third parties must be respected in terms of their proprietary rights. The most current local Product Data Sheet should always be consulted for any product concern, copies of which can be obtained upon request.