Use of floor hardner for Polish concrete system

 It is commonly used in heavy-duty areas such as basements, warehouses, extreme sports areas, educational institutions and some commercial buildings. floor hardner is a complex chemical that is easy to apply. To install concrete hardeners, floor surfaces must be cured for at least two weeks and cleaned of dust, dirt, paints, coatings, wax, grease, bond breakers, oil spreads, curing compounds and other contaminants.

You can also choose to wash the floor thoroughly to remove contaminants and allow it to dry completely. After that, you can start hardening at 200ft2 / gallon (5m2 / liter). Only one application is required to make the concrete surface permanently denser.

The concrete hardener should be moved with a fine-bristle broom to get to the surface of the concrete.

The process of polishing concrete with floor hardner

Step 1 - Determine the surface hardness

When choosing the right metal bond diamond abrasive, you must first determine the surface hardness. To get an average test rating, you need to run tests on three-story parts.

Step 2 - Preparing the concrete surface

The next step is metal grinding for concrete surface preparation. Find out if the floor is coated and determine the type of coating to remove with proper tooling. Make sure the surface holes or cracks are properly repaired.

Step 3 - Trace the metal tool

Before applying floor hardner, you must remove the metal tooling traces with transitional tooling of 50 and 100 grit. Transitional tooling effectively removes metal stains and prepares surfaces ready for polishing.

Step 4 - Density and hardening of concrete

Once the tool marks have been removed and the floor has been cleaned and vacuumed, you can now apply a densifier to the concrete to bring the surface thicker and denser and to provide additional protection against water ingress and staining.

Once you have completed steps 1 through 4, you can proceed with your concrete polishing and seal and protect the floor.

Differences between floor hardner and epoxy

floor hardner is a material or chemical used to enhance cement surfaces with a thickness of 8,10 15 mm. The thickness will be determined by the weight required to support the surface. floor hardners are used in storage space, manufacturing facilities, warehouses, small and large appliance manufacturing and repair companies, refrigerated rooms and parking lots. floor hardners can also use their time to maintain and rebuild finished concrete surfaces.

Epoxy is made by combining compounds known as resin and hardener. When the resin is combined according to a specific formula, the two components begin to heal. It depends on the type of resin used, the hard compounds used and the healing temperature. As a result, you can use some epoxy, depending on your specific needs. Epoxy is commonly used as a strong adhesive to various materials including metal, wood and others.

Epoxy, in addition to its over-adhesive effects, can be used as a cement and mortar binder. This is a great non-skid coating for basement flooring in a garage or other space that has a lot of movement or machinery.

floor hardner can be used as a dust coat to place on a new concrete floor to increase its abrasion and weather resistance. Although using floor hardner for your flooring application may cost you a little bit of luck, it will pay off.we at satiates  provides one of the best quality of Sika Chapdur, is an one kind of Floor Hardner. 

https://www.satiates.in/sika-chapdur-floor-hardner.php